Basic Rhombus shape Steel Barn Door Hardware Kit
- Model
- M00004
Item specifics
- Material
- Steel
- Finishing
- Satin Black
- Qty/ctn
- 1 set
- Carton size
- L: 204 W: 22 H: 8.5
- Remark
- Remark
- CBM/ctn
- 0.038
Review
Description
Product Introduction
Rhombus Barn Door Hardware Kit
This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
Product Detailed Parameters
|
Item no
|
M00004
|
|
Finishing
|
Satin Black
|
Remark | one-piece rail packed |
Material | Steel |
Description | Barn Door Track,6mm thickness,2x Door Stoppers,2x Door Hangers,1x Floor Guide,2x Anti-jumpers,5sets x M10 Wall Mounted Screws and anchors,6x M10*60 Bolts for 40-45mm doors,1x Track Connector ,,1x Manual |
|
Qty/ctn
|
1 set
|
|
Carton size
|
L: 204 W: 14 H: 8.5 |
CBM/ctn | 0.038 |
G.W./ctn | 8 |
N.W./ctn | 7.4 |
MOQ(pcs) | 100 |
Product Features
Features :
Easy to install: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
Space-saving: makes your room look more spacious without the usual door opening.
Durable: high purity bearing steel Gcr15, tested for 100000 times.
Low-noise: robust roller made of carbon steel, premium aluminum wheel, slide smoothly and silently.
Wide use: ideal for kitchen, storage room, bedroom, study room, dressing room, Laundry room, closet, cabinet, storage, wardrobe, wine cellar, farm etc.
Package :
2 × 3 FT Rails: Rails come with pre-drilled holes of 16 inch spacing. Rail is made by solid 1/4" thick carbon steel, finished with highly durable powder coating. Fit door panel width: 36"-40".
5 × Rail Spacers & Lag Bolts: With lag bolts and the spacers, it is used to connect the rail on the wall.
2 × Hangers: The strap of the hanger is made by 1/4" thick carbon steel and the wheel is made by duty nylon, very durable and smooth. Fit door panel thickness: 1 3/8" and 1 3/4".
2 × Door Stoppers: Door stoppers slide along the rail and tighten down at any point to stop your doors anywhere you want, and they're cushioned by rubber caps for a quiet close.
Floor Guide: Mark center line of overlap and place center of floor guide in line.Slide the door closed and secure the floor guide.
2 × Anti-Jump Discs: Fasten anti-jump discs to top of door by placing them an least 1" from the edge of door.
What we can do for you?
- If the above model is not suitable for your workpiece, please tell us your need and then we can send you the most satisfying drawing.
- contact us
